Cold Cloud Mechanical

Heat Pump Installation in Sierra Madre, CA

A heat pump handles both heating and cooling, which suits Sierra Madre’s mild foothill climate. We size it with a room-by-room load calculation and install it with the permit and final testing included.

(747) 298-8580
  • Clean, Professional Workmanship
  • Room-by-Room Load CalculationManual J
  • 3-Year Labor Warranty on Installation
  • Licensed & insuredCSLB #1131338 · C-20 & C-38
Cold Cloud technicians with installation tools on a job site

How the installation works

You’re in control at every step.

We explain the findings, agree on the scope with you, and keep you informed as the work moves forward.

Cold Cloud technician reviewing plans inside a home remodel
  1. 01

    Get a free assessment

    We 3D-scan your home and size the system room by room.

  2. 02

    Choose your system

    Compare written options and prices.

  3. 03

    Schedule installation

    Pick a date. Our crew installs and tests it.

  4. 04

    Relax, we handle it

    We handle the permit, city inspection and HERS check.

  5. 05

    Claim your rebate

    Submit the documents we prepare for you.

Usually 3 to 5 days from signing to installation.

Warranties: 3 years on labor from the end of installation. Manufacturer warranty of 10–12 years, depending on the equipment; we register it for you.

Installation details
  • Old refrigerant is recovered into a cylinder under the federal EPA 608 rule.
  • Connections are brazed while purging with nitrogen, pressure-tested with nitrogen and evacuated to 500 microns before charging.
  • The refrigerant charge is weighed in to the manufacturer’s specification.
  • New systems use R-32 or R-454B refrigerant, with the leak sensor and parts these refrigerants require.
  • Startup includes temperature split, static pressure, amp draw, superheat and subcooling, and blower setup matched to your ducts.

Start with the space.
Then design the system.

Uneven rooms and a system that never quite feels right deserve more than a new equipment label. We look at the home, its heating and cooling needs, and how air moves through it.

  1. 01 / Capture the geometry

    A 3D scan helps document the room shapes and dimensions.

  2. 02 / Calculate the load

    Manual J combines geometry with separately assessed insulation, windows and other inputs.

  3. 03 / Plan the airflow

    Equipment selection, supply and return paths, duct sizes and room airflow work together.

INSIDE THE PLANNING PROCESSSCAN VIDEO / 00:20
20-second scan video · paused

3D scan in Conduit, duct design in Wrightsoft

From measurements to a plan.

Separate Wrightsoft design examples, with duct routes, dimensions and room-by-room airflow.

Lower the cost of your new system.

Sierra Madre homes are served by Southern California Edison and SoCalGas. Some SCE customers in designated communities may qualify for a heat pump rebate through SCE’s Home Performance Plus program, and qualifying Daikin systems may qualify for a Daikin instant rebate that we apply on your invoice. Eligibility is confirmed by each program. See which programs apply to your home.

Heat pump installation in Sierra Madre

Sierra Madre’s climate rarely swings to extremes, which is why a heat pump makes sense here: one system covers warm foothill afternoons and cooler evenings. The catch is that a heat pump only performs when it is sized correctly. An oversized unit short-cycles, and an undersized one struggles on cold nights, so we start with an actual Manual J load calculation that factors in square footage, insulation, window exposure and the existing ductwork.

Heat pumps move heat rather than generate it, which is efficient in a climate where temperatures rarely drop low. For homes with good central ductwork, a ducted heat pump is the straightforward choice. For additions, converted garages and older cottages without ducts, ductless mini-split heat pumps give each room its own control.

Sierra Madre’s older housing stock raises issues an equipment swap does not address: duct leaks, too little return air, or ductwork sized for a smaller load. We check these at the assessment and tell you which apply before you decide.

Permits and inspection

Heat pump installations in Sierra Madre need a mechanical permit and must meet Title 24 energy code. We handle the permit, the inspection and the HERS verification as part of the installation.

What your home may need

These are the things we check at the assessment. Each one can change the scope and the price, and we tell you which apply before you decide.

  • How you heat now. If a gas furnace heats your home, the heat pump takes over heating as well as cooling. This also decides which rebate programs may apply.
  • Ducts. We measure static pressure, the resistance of your ductwork. If it is too high, the system will be noisy and deliver less air, and the ducts or return may need correcting first.
  • Electrical panel and circuit. The breaker and wire are sized from the new unit’s nameplate. If the existing circuit does not meet it, a new circuit runs from the panel. If the panel lacks capacity, you will know before the estimate.
  • Outdoor unit location. The unit sits level, above grade, with the clearances the manufacturer requires. On a roof it goes on a stand, not on the roofing.
  • Refrigerant lines. Existing lines are flushed and pressure-tested. If they are not suitable, new lines are added.
  • Attic access. If the air handler is in the attic, code requires a proper opening, a walkway to the unit, a service platform, a light and an outlet.

Sometimes the next step is a repair

The assessment is meant to find the right fix, which is not always a new system.

  • One failed part on a system that otherwise runs well. A repair may make more sense than a replacement.
  • One room is too hot or too cold. The cause is often the ductwork to that room, and correcting it can solve the problem without new equipment.
  • Repeated breakdowns or an R-22 system. Repairs get harder to justify, and a replacement is usually the better use of money.

HVAC repair in Sierra Madre

Heat pump installation in Sierra Madre: questions

How much does heat pump installation cost in Sierra Madre?

The price depends on the size of the home, the equipment tier, and whether ductwork or electrical upgrades are needed. You get written options with scope and price after a free in-home assessment, with the permit and HERS verification included.

Is a heat pump a good fit for Sierra Madre?

In most homes, yes. Winters here are mild, so a heat pump can heat and cool the house with one system. We confirm it with a room-by-room load calculation before recommending equipment.

Do I need new ductwork for a heat pump?

Not always. We measure static pressure on the existing ducts. If they can carry the airflow, they stay; if not, we correct the ducts or the return first. Homes without ducts can use ductless mini-split heat pumps.

Will my electrical panel handle a heat pump?

We check the panel and circuit at the assessment. If a new circuit or a panel upgrade is needed, you will know before the estimate.

Do I need a permit for a heat pump in Sierra Madre?

Yes. A heat pump installation needs a mechanical permit and inspection, and it must meet Title 24. We handle the permit, the inspection and the HERS verification.

Book a free in-home assessment in Sierra Madre

At the visit we measure your home room by room, check your ducts, electrical panel and equipment location, and answer your questions. You get written options with scope and price afterward.

(747) 298-8580
Mon–Fri 8:00 am – 8:00 pm · Sat–Sun 9:00 am – 6:00 pm

Our services in Sierra Madre

  • CSLB license C-20 and C-38CSLB #1131338
    C-20, C-38
  • Daikin Comfort Pro dealerDaikin Comfort Pro
    dealer
  • NATE certified techniciansNATE-certified
    technicians
Drawing example
Wrightsoft drawing

Separate engineering example. Scroll to inspect when zoomed. Press Escape to close.

Request service

Tell us what’s happening. Our team will contact you to confirm availability.