Cold Cloud Mechanical

Furnace Installation in Arcadia, CA

Arcadia winters are mild, but cool nights still need a heater that keeps up, especially in larger homes. Cold Cloud installs furnaces and heaters properly sized for your home, new construction or replacement.

(747) 298-8580
  • Licensed & InsuredCSLB #1131338 · C-20 & C-38
  • Gas & Electric Options
  • Manual J Sizing
  • Written Options and Scope
Cold Cloud technician wheeling a cart of tools and equipment across a job site

In Arcadia, larger homes often have more than one furnace or a system split into zones, and a furnace sized off the old unit’s label runs longer and costs more than it should. Whether you are finishing a new build or replacing a heater that has stopped keeping up, we size every system room by room and zone by zone, especially with gas furnaces, where improper installation is a real safety risk, not just a comfort issue.

We size every heater to your home’s actual heating load, not just the old unit’s rating. You get a written estimate, safe and code-compliant installation, critical for gas furnaces, and a system tested before we call the job done.

Start with the space.
Then design the system.

Uneven rooms and a system that never quite feels right deserve more than a new equipment label. We look at the home, its heating and cooling needs, and how air moves through it.

  1. 01 / Capture the geometry

    A 3D scan helps document the room shapes and dimensions.

  2. 02 / Calculate the load

    Manual J combines geometry with separately assessed insulation, windows and other inputs.

  3. 03 / Plan the airflow

    Equipment selection, supply and return paths, duct sizes and room airflow work together.

INSIDE THE PLANNING PROCESSSCAN VIDEO / 00:20
20-second scan video · paused

3D scan in Conduit, duct design in Wrightsoft

From measurements to a plan.

Separate Wrightsoft design examples, with duct routes, dimensions and room-by-room airflow.

Our 3-Step Installation Process

 A sizing-first process: we calculate your home’s actual heating load before recommending anything.

Cold Cloud technician loading tools into a fully stocked service van
  1. 01

    Load Calculation

     We size the system to your home, not the old unit’s rating.

  2. 02

    Safe, Code-Compliant Install

     Proper gas or electrical connections, done to code, no shortcuts.

  3. 03

    Tested Before We Leave

    We confirm safe, correct operation before calling the job done.

Lower the cost of your new system.

Arcadia homes are served by Southern California Edison and SoCalGas. Some SCE customers in designated communities may qualify for a heat pump rebate through SCE’s Home Performance Plus program, and qualifying Daikin systems may qualify for a Daikin instant rebate that we apply on your invoice. Eligibility is confirmed by each program. See which programs apply to your home.

Permits and rebates for a new furnace in Arcadia

Permit and duct leakage test

Replacing a gas furnace in Arcadia needs a mechanical permit from the city. We pull the permit and attend the inspection. California requires an independent HERS test of duct leakage when a furnace with ducts is replaced. California Energy Commission · Checked on October 21, 2026.

SoCalGas furnace rebate

Homes with SoCalGas service may qualify for a rebate on a qualifying high-efficiency gas furnace installed with a closed permit. The furnace has to be ENERGY STAR certified with an efficiency (AFUE) of 92% or higher, and the program allows one rebate per household. The homeowner applies after the installation. SoCalGas · Checked on October 28, 2026. All rebates and financing

Heat pump rebates do not apply to a gas furnace replacement. If you are considering a heat pump instead, see heat pump installation in Arcadia.

When to Replace Your Heater

  • The system is more than 10-15 years old
  • It needs repairs more often than it used to
  • Energy bills keep climbing without a change in usage
  • Rooms never get consistently warm, even after running all day
  • You’re noticing indoor air quality issues when the heater runs

If two or more of these apply, repair costs are likely to keep piling up faster than a replacement would.

What’s Involved in Installation

  1. Sizing: We calculate your home’s actual heating load, not just what was there before.
  2. Removal: The old unit is safely removed and disposed of.
  3. Installation: New heater installed to code, with proper gas or electrical connections.
  4. Testing: We confirm safe, correct operation before finishing the job.

Why Professional Installation Matters

Gas furnace installation isn’t a place to cut corners: improper venting or gas connections are a genuine safety risk, not just an efficiency issue. Getting it right the first time protects both your safety and your energy bill.

If your heater needs an inspection rather than full replacement, we also handle heater repair in Arcadia.

Cold Cloud Mechanical

A properly sized, correctly installed heater doesn’t just run safer, it runs cheaper. Combined with basic maintenance and reasonable insulation, a new high-efficiency furnace can meaningfully cut your winter energy bills compared to an aging system.

Our technicians handle furnace and heater installation across Arcadia, new construction or replacement, gas or electric. Every job includes proper sizing, safe installation, and a final test before we leave.

What to Confirm Before You Sign an Install Contract

Service DetailWhy It Matters
HERS / duct-leakage test on completionCalifornia requires it on new systems, it’s the number that proves the ducts don’t leak
Manual D duct sizing, not just Manual J on the boxThe right-size unit on the wrong ducts still leaves hot and cold rooms
Low-GWP refrigerant, R-32 or R-454BNew units are moving off R-410A; ask what yours ships with
Electrical panel capacity checked before an all-electric swapA heat-pump changeover can need a panel upgrade nobody quoted for
Refrigerant line set, reused or replaced?Old lines often can’t carry a new refrigerant type; reusing them can risk the warranty

Furnace installation in Arcadia: questions

How much does furnace installation cost in Arcadia?

The price depends on the furnace size and efficiency, the venting, and whether the ducts, gas line or electrical need work. You get written options with scope and price after the in-home assessment.

Is there a rebate for a new gas furnace in Arcadia?

Homes with SoCalGas service may qualify for a rebate on a qualifying high-efficiency gas furnace installed with a closed permit. The furnace has to be ENERGY STAR certified with an AFUE of 92% or higher. Heat pump rebates do not apply to a gas furnace.

Do you pull the permit?

Yes. We pull the mechanical permit with the city, attend the inspection and schedule the HERS duct leakage test.

Get in touch with us

Whether you’re finishing new construction or replacing an aging heater, getting the sizing and installation right matters: for comfort, safety, and your energy bill. Contact Cold Cloud for a site assessment and a written installation estimate for your Arcadia home. We’ll walk you through gas and electric options and help you find the right fit for your space and budget.

(747) 298-8580
Mon–Fri 8:00 am – 8:00 pm · Sat–Sun 9:00 am – 6:00 pm

Our services in Arcadia

  • CSLB license C-20 and C-38CSLB #1131338
    C-20, C-38
  • Daikin Comfort Pro dealerDaikin Comfort Pro
    dealer
  • NATE certified techniciansNATE-certified
    technicians
Drawing example
Wrightsoft drawing

Separate engineering example. Scroll to inspect when zoomed. Press Escape to close.

Request service

Tell us what’s happening. Our team will contact you to confirm availability.