Glendale heat pump installation starts with Cold Cloud Mechanical. Our technicians hold EPA 608 certification, size systems using Manual J, and pull every permit required.
Get $100 Off Your First Repair
24/7 Emergency Services
93% of Issues Fixed on the First Visit
120-Day Warranty on Repairs
Cold Cloud Mechanical is a residential HVAC contractor with 14+ years of experience. Our CSLB C-20 licensed team (Lic. #1131338) handles heat pump installation near Glendale for all home sizes. Permits and Title 24 compliance are part of every job, and labor is covered by a 120-day warranty.
A Manual J load calculation kicks off each job. Each room gets measured individually. Insulation, window placement, and sun exposure go into the math. The result is a system sized for your actual home.
Hard freezes are rare here. Modern heat pump units run down to 0°F, which puts Glendale’s winter temps well within range. No ductwork? Ductless models skip the wall demolition entirely and deliver the same output.
Give us a call for a same-day heat pump installation consultation. We check ductwork, existing equipment, and your electrical panel. Nothing gets recommended until we see what you’re working with.
One unit covers both cooling and heating. For our climate, that’s a straightforward fit.
A heat pump replaces a separate furnace and AC unit. One system to maintain, one service schedule, one contact for repairs, and heat pump maintenance.
Gas furnaces burn fuel. Heat pumps don’t. They extract heat from outdoor air and move it inside, which draws significantly less power. SEER2 and HSPF2-rated models cut heating and cooling costs by 20% to 50% over older equipment.
Furnaces and AC units cycle on hard, push air, then cut off. Some rooms get too much, others not enough. Heat pumps run at lower intensity for longer stretches and hold temperature more evenly.
TECH Clean California, the GWP rebate program, and federal tax credits all apply to qualifying installations. We pull up every program you may qualify for before any work is scheduled.
Providing reliable HVAC and refrigeration services across Los Angeles and Orange County.
happy clients
Heat pump installation cost in Glendale varies by project. Key factors include:
Single-zone work starts around $4,500 and can reach $9,000 before rebates. Multi-zone setups cost more. You get a written estimate before anything starts.
years of experience
Call on: (747) 298-8580
Mo – Fr: 8:00 am – 8:00 pm
Sa – Su: 9:00 am – 6:00 pm
Mail us: info@thecoldcloud.com
Manual J load calculation, ductwork inspection, and electrical review. You get a written estimate before we touch anything.
We remove and dispose of your old equipment. The new system goes in per manufacturer specs and local code, including all refrigerant, electrical, and ductwork connections.
Heating cycle, cooling cycle, register-by-register airflow check, thermostat confirmation. We stay until the output is right.
Our team delivers on specifics that matter to homeowners:
Same crew from estimate to sign-off. No handoffs, no subcontractors.
Our team is skilled in emergency repairs to ensure lasting solutions and peace of mind.
We’re here for you anytime, day or night, to handle urgent HVAC and refrigeration issues.
Our technicians arrive quickly to get your equipment running with minimal delay.
Ducted, ductless, and dual-fuel systems each fit different homes. We stock Trane, Carrier, Daikin, Lennox, and other brands. The right call depends on your ductwork, room layout, and budget. We go through the specifics with you before anything gets ordered.
A unit past the 10-year mark tends to cost more in repairs than a replacement would run. Most installs finish in a day. Some take two. Old equipment comes out, the permit gets filed, the city inspection gets scheduled, and the Title 24 sign-off is completed before we leave the job.
Book annual heat pump service after installation to protect efficiency and keep manufacturer coverage active.
Glendale homeowners can access several programs:
We confirm eligibility before work starts and handle the paperwork with you.
From the first consultation to the final system check, our customers count on us for honest guidance, smooth installations, and energy-efficient heat pump systems that deliver real comfort and savings.
Cold Cloud Mechanical made the entire process feel easy. They explained all my options clearly, helped me apply for a rebate, and installed the system in a single day. My house is more comfortable, and the bills are lower!
Jennifer Lewis, Homeowner, Pasadena, CA
We upgraded to a heat pump to replace an old gas furnace, and I’m honestly shocked at how much quieter and cleaner it runs. These guys are the real deal—punctual, professional, and super helpful.
Carlos Martinez, Architect, Santa Monica, CA
They handled all the rebate paperwork and walked us through setting up the smart thermostat. Super efficient crew, and the system works like a charm. Highly recommend them!
Samantha O’Connor, Interior Designer, Long Beach, CA
The guys at Cold Cloud are pros. No pressure sales, just facts and great service. They even followed up a week later to check how everything was running. That kind of care is rare these days.
Trevor Jenkins, Music Producer, North Hollywood, CA
Cold Cloud handled everything—from helping me choose the right heat pump to registering for the rebate program. This is exactly the kind of professionalism I look for.
Sophie Delgado, HR Manager, Redondo Beach, CA
My old system was on its last leg. Cold Cloud helped me choose the best heat pump for my needs, and now my place is cool in summer and warm in winter without the crazy bills.
Jordan Fields, Freelance Writer, Echo Park, CA
Cold Cloud Mechanical’s expertise in HVAC and commercial refrigeration services in action. From installations to repairs, our work showcases quality craftsmanship and attention to detail in every project.
Cold Cloud Mechanical provides professional HVAC installation that homeowners can count on. We cover all of Glendale and the surrounding area. Call or use our online form to get on the schedule. Walk-throughs are available the same day.
Single-zone jobs land between $4,500 and $9,000 before rebates. System type, zone count, and any electrical work shift that range. Call us for a number tied to your home.
They do. Modern units are rated for high ambient temperatures and put up consistent output through Glendale’s hottest months.
Yes. A single electric heat pump system delivers energy-efficient heating and cooling year-round. No furnace required.
One day covers most single-system jobs. Multi-zone and ductless installs with more equipment may run into a second day.
TECH Clean California, the GWP program, and the federal 25C tax credit are the main three. Eligibility gets confirmed before your project starts.
Yes. Current models carry high-ambient ratings and hold steady output through Glendale’s hottest stretches.
